User's Manual

41
Workgroup Bridge
Workgroup Bridge feature enables the access point to extend the accessibility of a remote network.
In Workgroup Bridge mode, the access point acts as a wireless station (STA) on the wireless LAN. It
can bridge traffic between a remote wired network and a wireless LAN.
When Workgroup Bridge is enabled, SSID configuration still works to provide wireless
services to clients.
All access points participating in Workgroup Bridge must have the identical settings for Radio
interface, IEEE 802.11 mode, Channel Bandwidth, Channel (Auto is not recommended).
Figure 30: Workgroup Bridge
Data - Workgroup Bridge Screen
Workgroup Bridge
Radio
Select the desired radio from the list.
Workgroup Bridge Status
Status
Enable or disable Workgroup Bridge function.
Before configuring Workgroup Bridge, make sure all devices in
Workgroup Bridge have the following identical settings.
• Radio
• IEEE 802.11 Mode
• Channel Bandwidth
• Channel (Auto is not recommended)
Infrastructure Client Interface
SSID
Enter the name of the SSID to which Workgroup Bridge will connect.
Click Site Survey button to choose from the list. It's necessary for
Workgroup Bridge to connect to remote access point.