User manual

45
Appendix C PC And Server Configuration
Linksys
7. Select Computer Configuration -> Windows Settings -> Security Settings ->
Public Key Policies, right-click Automatic Certificate Request Settings -> New
-> Automatic Certificate Request.
Figure 56: Group Policy Screen
8. When the Certificate Request Wizard appears, click Next.
9. Select Computer, click Next.
Figure 57: Certificate Template Screen
10. Ensure that your Certificate Authority is checked, click Next.
11. Review the policy change information and click Finish.
12. Click Start -> Run, type “cmd” and press enter.
Enter “secedit /refreshpolicy machine_policy”
This command may take a few minutes to take effect.
Internet Authentication Service (RADIUS) Setup
1. Select Start -> Programs -> Administrative Tools -> Internet Authentication Service
2. Right-click on Clients, and select New Client.
Figure 58: Service Screen
3. Enter a name for the access point, click Next.
4. Enter the address or name of the wireless access point, and set the shared
secret, as entered on the Security Settings of the wireless access point.
5. Click Finish.
6. Right-click on Remote Access Policies, select New Remote Access Policy.
7. Assuming you are using EAP-TLS, name the policy “eap-tls”, and click Next.
8. Click Add...
If you don’t want to set any restrictions and a condition is required, select
Day-And-Time-Restrictions, and click Add...
9. Click Permitted, then OK. Select Next.
10. Select Grant remote access permission. Click Next.