User manual

CHAPTER 2 Access Point Setup
Linksys
8
Management Access
You can use the Management Access page to configure the management
methods of the access point.
Figure 12: Management Access Screen
Data - Management Access Screen
Web Access
HTTP HTTP (Hyper Text Transfer Protocol) is the standard
for transferring files (text, graphic images and other
multimedia files) on the World Wide Web.
Enable to allow Web access by HTTP protocol.
HTTP Port Specify the port for HTTP. It can be 80 (default) or
from 1024 to 65535.
HTTP to HTTPS
Redirect
Enable to redirect Web access of HTTP to HTTPS
automatically.
This field is available only when HTTP access is
disabled.
HTTPS HTTPS (Hypertext Transfer Protocol Secure) can
provide more secure communication with the SSL/
TLS protocol, which support data encryption to
HTTP clients and servers.
Enable to allow Web access by HTTPS protocol.
HTTPS Port Specify the port for HTTPS. It can be 443 (default) or
from 1024 to 65535.
From Wireless Enable wireless devices to connect to access point’s
admin page. Disabled by default.
Access Control By default, no IP addresses are prohibited from
accessing the device’s admin page. You can
enable access control and enter specified IP
addresses for access. Four IPv4 and four IPv6
addresses can be specified.
SNMP Settings
SNMP Simple Network Management Protocol (SNMP) is a
network monitoring and management protocol.
Enable or disable SNMP function here. Disabled by
default.
Contact Enter contact information for the access point.
The contact includes 1 to 32 characters. Special
characters are allowed.