User's Manual
Table Of Contents
- User Guide
- Chapter 1: Introduction
- Chapter 2: Planning your Wireless Network
- Chapter 3: Getting to Know the Wireless-G Access Point
- Chapter 4: Connecting the Wireless-G Access Point
- Chapter 5: Setting Up the Wireless-G Access Point
- Chapter 6: Linksys Wireless Guard
- Chapter 7: Configuring the Wireless-G Access Point
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Upgrading Firmware
- Appendix D: Windows Help
- Appendix E: Glossary
- Appendix F: Specifications
- Appendix G: Warranty Information
- Appendix H: Regulatory Information
- Appendix I: Contact Information
Wireless-G Access Point
Navigating the Utility
There are four main tabs: Setup, Status, Advanced, and Help. Additional screens will be available from the main
tabs.
Setup
•
Basic Setup. Enter the Internet connection and network settings on this screen.
•
Password. Change the Access Point’s Password and change its settings back to their defaults from this
screen.
•
AP Mode. From this screen, you can configure how the Access Point will work with other access points in
your network.
firmware: the programming code that runs a
• Log. You can view or save, even email, activity logs from this screen.
networking device
Status
• This screen will display current information on the Access Point, its settings, and its performance.
Advanced
•
Filters. From this screen, you can allow or prevent access to your network.
•
Advanced Wireless. From this screen, you can configure the Access Point’s more advanced wireless settings.
snmp: the standard e-mail protocol on the Internet
• SNMP. This screen allows you to customize the Simple Network Management Protocol (SNMP) settings.
Help
• For help on the various tabs in this Web-based Utility, go to this screen.
Chapter 7: Configuring the Wireless-G Access Point
Navigating the Utility
30