User's Manual
Table Of Contents
- User Guide
- Chapter 1: Introduction
- Chapter 2: Planning your Wireless Network
- Chapter 3: Getting to Know the Wireless-G Access Point
- Chapter 4: Connecting the Wireless-G Access Point
- Chapter 5: Setting Up the Wireless-G Access Point
- Chapter 6: Linksys Wireless Guard
- Chapter 7: Configuring the Wireless-G Access Point
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Upgrading Firmware
- Appendix D: Windows Help
- Appendix E: Glossary
- Appendix F: Specifications
- Appendix G: Warranty Information
- Appendix H: Regulatory Information
- Appendix I: Contact Information
Wireless-G Access Point
3. The screen in Figure 6-12 will appear. Under Guests, click Add Guest.
Figure 6-12: Modify Access Control
4. The screen in Figure 6-13 will appear. Enter the Guest User Name, Guest First Name, Guest Last Name,
Password, Password Verify, Access Duration, then click Submit.
Guest User Name. Enter a user name of the guest you want to add.
Guest First Name. The first name of the guest you want to add.
Guest Last Name. The last name of the guest you want to add.
Password. Enter a password that’s at least six characters for the guest you want to add.
Password Verify. Enter the password again.
Access Duration. Enter the length of time that the guest will be on the network in hours.
5. The guest will need to install the Linksys Wireless Guard Client software on his PC. The software can be
Figure 6-13: Add Guest
downloaded from the Setup CD-ROM or from Linksys.com/support. Refer to Client Software Installation at the
beginning of this chapter.
Chapter 6: Linksys Wireless Guard
Your Account
24