User's Manual
Table Of Contents
- User Guide
- Chapter 1: Introduction
- Chapter 2: Planning your Wireless Network
- Chapter 3: Getting to Know the Wireless-G Access Point
- Chapter 4: Connecting the Wireless-G Access Point
- Chapter 5: Setting Up the Wireless-G Access Point
- Chapter 6: Linksys Wireless Guard
- Chapter 7: Configuring the Wireless-G Access Point
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Upgrading Firmware
- Appendix D: Windows Help
- Appendix E: Glossary
- Appendix F: Specifications
- Appendix G: Warranty Information
- Appendix H: Regulatory Information
- Appendix I: Contact Information
Wireless-G Access Point
3. When the next screen appears, your Access Point will be automatically configured. Make sure that the correct
access point is selected and that the name is correct. Also, make sure that the SSID is correct. Click Next to
add this Access Point to your network or click Back to return to the previous screen.
Figure 5-13: The Securing your Access Point Screen
4. For security reasons, the password has been automatically changed. Please note the new password before
continuing or you won’t be able to access the Access Point later. After writing down the new password, select
I have noted the new password, then click OK.
Figure 5-14: Note the New Password Screen
Chapter 5: Setting Up the Wireless-G Access Point
Linksys Wireless Guard Setup
16