User manual

12
Verwendung des KVM-Umschalters
Wenn Sie die Initialisierungsfolge über die Standard-Rollentaste verändern wollen,
können Sie entweder den Tastaturbefehl eingeben: Rollentaste – Rollentaste
– H – (y), y = y = Rollentaste, Feststelltaste, ESC, F12 oder Num-Taste (siehe
Installationsanleitung).
oder
Sie können folgende Methode verwenden: Halten Sie die letzte Taste auf dem KVM-
Umschalter gedrückt, um den Einstellungsmodus für die Tastaturbefehle einzugeben.
Schritt 1. Drücken Sie die letzte Taste (d. h. die zweite Taste auf dem 2-Port-Modell und
die vierte Taste auf dem 4-Port-Modell), bis zwei Signaltöne ertönen. Lassen
Sie die Taste dann los.
Schritt 2. Sie müssen dann innerhalb von zwei Sekunden eine beliebige Taste drücken,
die den Tastaturbefehl auslösen kann: (y), y = y = Rollentaste, Feststelltaste,
ESC, F12 oder NUM-Taste. Diese Taste löst dann den Befehl aus.
Beispiel: Wenn Sie die Festelltaste nach dem Ertönen von zwei Signaltönen drücken, ist
der Tastaturbefehl: Feststelltaste – Feststelltaste – Befehlstaste.
Genauere Informationen zu Tastenfolgen und ihren entsprechenden Funktionsbefehlen
finden Sie in der Kurzübersicht.
Hotkey Reference Table
2/4-port SOHO KVM Switch w/ Audio&Mic -- Operation Commands for Hotkeys / Front-Panel Buttons
Hotkey sequence = [ScrLk]
*
+ [ScrLk]
*
+ Command key(s) * User-definable Preceding sequence = SCROLL LOCK, CAPS, F12 or NUM
LOCK, LEFT_CTRL, RIGHT_CTRL
Command
Hotkeys
1
Front-panel
Buttons
Description
Select Computer Channel
2
(Joint-select PC port/audio&mic,
if binding is enabled)
ScrLk + ScrLk + (x)
(x is a top-row number key)
x = 1~2 / x = 1~4 for PC channel no
Press the computer icon on
the left of a button to select
the active computer
channel
Select the active computer channel
(Hotkey: Joint-select PC port/audio&mic , if
binding is enabled)
Select Audio&Mic Channel
2
(Joint-select PC port & audio/mic , if
binding is enabled)
ScrLk + ScrLk + (Fy)
Fy = F5~F6/Fx=F5~F8 (Fy is a function
key)
y = 1~2 / y = 1~4 for audio/mic channel
no
--
Select the active Audio&Mic channel
(Hotkey: Joint-select PC & audio&mic
channel, if binding is enabled)
Bind Computer & Audio/Mic
Switching
2
[Default]
ScrLk + ScrLk + Q
--
Enable the binding of PC port and
audio&mic switching. (Hotkey: Once this
feature is enabled, any computer and/or
audio&mic switching by hotkeys is bound
together) (factory default)
Unbind PC & Audio/Mic
Switching
2
ScrLk + ScrLk + W
--
Disable the binding of PC port and
audio&mic switching
Next lower PC channel
2
(Joint-select PC /audio&mic,if binding
is enabled)
ScrLk + ScrLk + (arrow down)
--
Select the next lower connected PC channel
(Hotkey: Joint-select PC/audio&mic, if
binding is enabled)
Next higher PC channel
2
(Joint-select PC /audio&mic, if binding
is enabled)
ScrLk + ScrLk + (arrow up)
--
Select the next higher connected PC channel
(Hotkey: Joint-select PC/audio&mic , if
binding is enabled)
Previous PC channel
ScrLk + ScrLk + (Backspace)
--
Toggle between the previous channel and
current channel
Define Hotkey Preceding Sequence
ScrLk + ScrLk + H + (y)
y = SCROLL LOCK, CAPS,
F12, NUM LOCK, LEFT_CTRL, or
RIGHT_CTRL
Press and hold down last
button (Button 2 /
Butotn4) till three beeps,
release the button, then
press (y) key
Select the hotkey preceding sequence among
5 alternative keys