User Manual

LINKSYS BEFCMU10 ver. 3 User Manual
Appendix: Specification
Product Overview
LINKSYS BEFCMU10 ver. 3 is a DOCSIS 2.0-base cable modem that provides high-speed
connectivity to residential, commercial, and education subscribers on public and private networks via
an existing cable infrastructure. BEFCMU10 ver. 3 uses the advanced PHY (A-TDMA/S-CDMA)
technologies to support higher bandwidth in the upstream. BEFCMU10 ver. 3 can inter-operate with
any DOCSIS compliant headend equipment. The IP traffic can transfer between BEFCMU10 ver. 3
and DOCSIS compliant headend equipment. The data security secures upstream and downstream
communications.
Features
General • F-Connector for the cable interface
• Standard RJ-45 connector for 10/100BaseT
Ethernet with auto-negotiation function and
auto-media dependent interface crossover (MDIX)
• USB Connector for USB (12Mbps) interface
• Clear LED Display
• Plug and Play
CableLabs DOCSIS
1.0/1.1/2.0 Standard
Compliant
• Up to 42.88 Mbps downstream and up to 30.72
Mbps upstream
• Frequency agility
• Transparent bridging for IP traffic
• Transparent bridging between CPE and RF
interface
• Transparent bridging between Ethernet and USB
interface
• Packet Filtering Up to 32 CPE MAC filters, 32
LLC filters, 32 IP filters
• Multiple users supported (32 CPEs supported)
• Security with X.509 Authentication / RSA
protected Key Exchange / 56 bits DES Data
Encryption
• Interoperable with any DOCSIS compatible