Daim Ntawv Qhia Tus Neeg Siv

How to Access the Settings Interface

To change or view range extender settings, first connect to an extended network, e.g.,

MyWiFi_Ext. In a browser, go to http://extender.linksys.com and enter admin password.

Note—Your range extender's default admin password is "admin". It is highly recommended that

you change this after WPS setup.

If you have not changed the range extender’s default name, you can also access the settings

interface when connected to your main router.

Enter into a browser

http://RE70000-XXX (Windows) or http://RE7000-XXX.local

or (Mac OS X

or iOS).

Note—XXX are the last 3 digits of your range extender’s MAC address. You can find the MAC

address on the back of your RE7000. (You might have to unplug your range extender to see the

MAC address label. Plug it back in and make sure the LED light is solid green before accessing

the URL.)

If you changed your range extender’s name, you can access the settings interface by entering the

new name in a browser. For example: if you named your extender MyExtender, enter

http://MyExtender (Windows) or http://MyExtender.local

(Mac OS X or iOS).

You can also enter your range extender’s IP address in a browser. Find the IP address on your

router’s administrative interface.