Specifications
Table Of Contents
- INTRODUCTION
- GETTING STARTED
- TERMINAL FEATURES
- The Display Panel
- The Cardreader
- The Keypad and Key Functions
- Entering Alphanumeric Data from the Keypad
- BOOT MODE FUNCTIONS
- TERMINAL DIAGNOSTICS
- DOWNLOAD PROCEDURES
- DOWNLOAD PARAMETERS
- Field Type Codes
- Memory Locations
- Account Range String Description
- Password Protect Settings
- Telecheck Check Service
- Telecheck Check Service Prompt Options
- Equifax Check Service Information
- Rocky Mountain Retail Services (RMRS)
- SprintNet
- Split Dial Authorization Option for American Express and Discover Cards
- DIAL STRING CODES
- BASIC OPERATION
- LOCAL FUNCTIONS
- ENTER 42: Dial Prefix (PABX)
- STANDARD KEY OPERATIONS
- Retail Credit Card Sale — Swipe
- Credit Card Sale — Manual Entry
- Credit Card Sale — Manual Entry With Direct Marketing/AVS prompts
- Sale: Purchasing Card — Card Swipe
- Sale: Purchasing Card — Manual Entry
- Credit Card Return — Swipe
- Credit Card Return — Manual Entry
- Authorization Only — Card Swipe
- Authorization Only — Manual Entry
- Authorization Only — Manual Entry With AVS/Direct Marketing
- Ticket Only — Card Swipe
- Ticket Only — Manual Entry
- Ticket Only — Manual Entry With AVS/Direct Marketing
- VIEW (WITHOUT PRINTING)
- Item Review
- Total Review (Card Totals)
- Total Review (Operator Totals)
- PRINTING REPORTS
- Item Detail Report
- Summary Report (Card Totals)
- Summary Report (Operator Totals)
- APPENDIX A—PROMPTS AND TROUBLE SHOOTING
- APPENDIX B—ADDITIONAL TROUBLESHOOTING GUIDELINES
- GLOSSARY
- INDEX
DOWNLOAD PROCEDURES
1999 LinkPoint® International, Inc. 30 L3FRET1 Reference Manual
Direct PC-to-POS Download
The direct PC-to-POS download requires the use of a local PC with the software necessary to
perform a local download (i.e., Zontalk 2000). Follow the procedures outlined below to setup
the LinkPoint 3000 terminal for a local download. A serial cable with a DB-9 female to the PC
male connector and 8-pin DIN male connector to the terminal’s RS-232C port, such as VeriFone
cable part #00446-04 REV. E, is required.
Display Message Operator Action
__App. not available Press the middle [▲] key to select LOAD.
_ Time__Load__Setup
[▲] [▲] [▲]
Or, if there is already an application loaded…
_____READY XXX Hold down the [ALPHA] key while pressing [7] [1] [3] [9] to
JAN-03-00_MON 12:00P enter the boot mode.
[▲] [▲] [▲]
__CLEAR_to_resume Press the middle [▲] key to select LOAD.
_ Time__Load__Setup
[▲] [▲] [▲]
Enter password: If prompted, key in the password and press [ENTER]. The
password may be obtained through the bank/ISO or FDRMS
(optional)
Help Desk.
Press the right [▲] key to select SET PORT.
Download Set port
[▲] [▲] [▲]
Select download port Press the right [▲] key to select RS232.
Modem RS232
[▲] [▲] [▲]
RS232 setup Press the left [▲] key to select BAUD.
Baud Parity
[▲] [▲] [▲]
Current baud: 19200 Select the correct baud rate, press [CLEAR] to accept the
1200 2400 9600 default of 19200. Press the [▲] key below your choice and
[▲] [▲] [▲] press [CLEAR] or press the [#] key to see other options.
RS232 setup Press the right [▲] key to select PARITY.
Baud Parity
[▲] [▲] [▲]