Specifications
Table Of Contents
- INTRODUCTION
- GETTING STARTED
- TERMINAL FEATURES
- The Display Panel
- The Cardreader
- The Keypad and Key Functions
- Entering Alphanumeric Data from the Keypad
- BOOT MODE FUNCTIONS
- TERMINAL DIAGNOSTICS
- DOWNLOAD PROCEDURES
- DOWNLOAD PARAMETERS
- Field Type Codes
- Memory Locations
- Account Range String Description
- Password Protect Settings
- Telecheck Check Service
- Telecheck Check Service Prompt Options
- Equifax Check Service Information
- Rocky Mountain Retail Services (RMRS)
- SprintNet
- Split Dial Authorization Option for American Express and Discover Cards
- DIAL STRING CODES
- BASIC OPERATION
- LOCAL FUNCTIONS
- ENTER 42: Dial Prefix (PABX)
- STANDARD KEY OPERATIONS
- Retail Credit Card Sale — Swipe
- Credit Card Sale — Manual Entry
- Credit Card Sale — Manual Entry With Direct Marketing/AVS prompts
- Sale: Purchasing Card — Card Swipe
- Sale: Purchasing Card — Manual Entry
- Credit Card Return — Swipe
- Credit Card Return — Manual Entry
- Authorization Only — Card Swipe
- Authorization Only — Manual Entry
- Authorization Only — Manual Entry With AVS/Direct Marketing
- Ticket Only — Card Swipe
- Ticket Only — Manual Entry
- Ticket Only — Manual Entry With AVS/Direct Marketing
- VIEW (WITHOUT PRINTING)
- Item Review
- Total Review (Card Totals)
- Total Review (Operator Totals)
- PRINTING REPORTS
- Item Detail Report
- Summary Report (Card Totals)
- Summary Report (Operator Totals)
- APPENDIX A—PROMPTS AND TROUBLE SHOOTING
- APPENDIX B—ADDITIONAL TROUBLESHOOTING GUIDELINES
- GLOSSARY
- INDEX
DOWNLOAD PROCEDURES
1999 LinkPoint® International, Inc. 27 L3FRET1 Reference Manual
DOWNLOAD PROCEDURES
There are three methods of downloading the application into the LinkPoint 3000: 1) remotely via
telephone, 2) PC-to-POS, and 3) POS-to-POS. Unless an application has been pre-downloaded,
the terminal will initially display the message APP. NOT AVAILABLE. If a full or a partial
download is selected, the terminal will prompt the user to enter any missing fields (i.e.,
application ID) and will automatically return to the first empty field.
NOTE: LP3000 units
installed with Operating System 3.2 or higher reflect a different format on line 2 of the display
during any download method. Rather than displaying AP-
xxxxxxx T-xxxxxxx, it will display
the application ID, a comma, followed by the terminal ID being downloaded, i.e.
L3FRET1,1234567890.
Telephone Download (No application loaded)
The telephone download requires the use of a remote PC with the software necessary to accept
incoming download requests (i.e., Zontalk 2000). Follow the procedures outlined below to setup
the LinkPoint 3000 terminal for a modem download.
When the terminal displays ‘APP. NOT
AVAILABLE’ on line 1 of the display, a FULL download must be initiated.
Display Message Operator Action
__App. not available Press the middle [▲] key to select LOAD.
_ Time__Load__Setup
[▲] [▲] [▲]
Press the right [▲] key to select SET PORT.
Download Set port
[▲] [▲] [▲]
Select download port Press the left [▲] key to select MODEM.
Modem RS232
[▲] [▲] [▲]
Modem settings Press right [▲] to select DIAL MODE.
Baud/par Dial Mode
[▲] [▲] [▲]
Select dial mode Select the phone line type. Press the left [▲] key to select
Tone Pulse TONE (standard) or press the right [▲] key to select PULSE.
[▲] [▲] [▲]
Tone dial selected A ...DIAL SELECTED message will display momentarily. Press
Tone Pulse [CLEAR] twice to return to DOWNLOAD SET PORT prompt.
[▲] [▲] [▲]
Press the left [▲] key to select DOWNLOAD.
Download Set_port
[▲] [▲] [▲]