Specifications
Table Of Contents
- INTRODUCTION
- GETTING STARTED
- TERMINAL FEATURES
- The Display Panel
- The Cardreader
- The Keypad and Key Functions
- Entering Alphanumeric Data from the Keypad
- BOOT MODE FUNCTIONS
- TERMINAL DIAGNOSTICS
- DOWNLOAD PROCEDURES
- DOWNLOAD PARAMETERS
- Field Type Codes
- Memory Locations
- Account Range String Description
- Password Protect Settings
- Telecheck Check Service
- Telecheck Check Service Prompt Options
- Equifax Check Service Information
- Rocky Mountain Retail Services (RMRS)
- SprintNet
- Split Dial Authorization Option for American Express and Discover Cards
- DIAL STRING CODES
- BASIC OPERATION
- LOCAL FUNCTIONS
- ENTER 42: Dial Prefix (PABX)
- STANDARD KEY OPERATIONS
- Retail Credit Card Sale — Swipe
- Credit Card Sale — Manual Entry
- Credit Card Sale — Manual Entry With Direct Marketing/AVS prompts
- Sale: Purchasing Card — Card Swipe
- Sale: Purchasing Card — Manual Entry
- Credit Card Return — Swipe
- Credit Card Return — Manual Entry
- Authorization Only — Card Swipe
- Authorization Only — Manual Entry
- Authorization Only — Manual Entry With AVS/Direct Marketing
- Ticket Only — Card Swipe
- Ticket Only — Manual Entry
- Ticket Only — Manual Entry With AVS/Direct Marketing
- VIEW (WITHOUT PRINTING)
- Item Review
- Total Review (Card Totals)
- Total Review (Operator Totals)
- PRINTING REPORTS
- Item Detail Report
- Summary Report (Card Totals)
- Summary Report (Operator Totals)
- APPENDIX A—PROMPTS AND TROUBLE SHOOTING
- APPENDIX B—ADDITIONAL TROUBLESHOOTING GUIDELINES
- GLOSSARY
- INDEX
BOOT MODE FUNCTIONS
1999 LinkPoint® International, Inc. 13 L3FRET1 Reference Manual
BOOT MODE FUNCTIONS
The LinkPoint 3000 boot mode allows access to certain operating system, hardware, and
diagnostic functions, including: date and time setup, terminal diagnostics, clear memory
(application and data), port setup and application download. Application download procedures
are covered in detail beginning on page 27. This section explains how to:
1. Set the correct date and time
2. Use terminal diagnostics
3. Setup ports
4. Erase the RAM
!
If the LP3000 displays APP. NOT AVAILABLE on line 1 of the screen and TIME LOAD
SETUP on line 2, it is already in boot mode. When in boot mode with an application
already loaded, line 1 displays CLEAR TO RESUME, while the display on line 2 is also
TIME LOAD SETUP.
Boot Mode Passwords
• If an application is already downloaded into the LinkPoint 3000 terminal (i.e. display reads
READY XXX), the procedure to gain access to the boot mode is:
hold down [ALPHA], press
[7] [1] [3] [9] and release [ALPHA]
.
• In the boot mode, if the LinkPoint 3000 terminal prompts for password entry, key in the
default password
[4] [6] [5] [1] [0] [7] [0] and press [ENTER]
.
If the terminal was configured
for a unique download password,
key in the unique password that can only be obtained
from the FDRMS Help Desk or the password assigned by the bank/ISO.
Cold Boot
The cold boot feature can be used to clear the terminal’s memory (RAM). This feature should
always be used under the guidance of a qualified service representative and should only be done
to clear a corrupted application or to perform download tests. To access this feature, unplug the
terminal’s power cord, hold down the [CLEAR] key, plug in the power cord, then release the
[CLEAR] key.
Display Message Operator Action
Enter password: Key in the default password of [4] [6] [5] [1] [0] [7] [0] or the
password assigned by the bank/ISO or FDMS Help Desk
[▲] [▲] [▲] and press [ENTER].
CLEAR to cold start Press the [CLEAR] key to erase the memory (RAM) or any
Any other to resume other key to reboot the terminal.
[▲] [▲] [▲]
LP-3000, 3.3, 03/24/99 Press the [*] key to reset the terminal to the
Select Test Number APP. NOT AVAILABLE display.
[▲] [▲] [▲]