Specifications

APPENDIX A—PROMPTS AND TROUBLE SHOOTING



1999 LinkPoint® International, Inc. 111 L3FRET1 Reference Manual
INVALID ZIP CODE
The Zip Code was entered incorrectly. The correct format is a
five or nine digit Zip Code.
ITEM NOT FOUND!
The terminal could not locate the particular item number
selected. Try a different item number.
KEY NOT ACTIVE
This message displays when an unavailable key is pressed.
LINE ERROR
There may be a communication problem between the terminal
and the host computer.
MOD-10 CHECK
The account number of the swiped/keyed card is invalid.
MODEM ERROR
The terminal has detected a problem with its modem. Try the
transaction again.
MUST FIRST RECV AUTH
This message prompts for approximately three seconds each
time the [x] [OFFLINE] key is pressed.
MUST PERFORM FULL
DOWNLOAD FIRST
This message prompts when a partial download is requested
but the application is not yet loaded into the terminal.
NO CARRIER
This message displays when a modem/RS232 error occurs.
NO DIAL TONE
This message displays when the phone line is not detected.
NO GUAR/OVER LIMIT
Too many checks or large checks have been authorized and put
the merchant over a pre-established check approval limit.
NO LINE
The terminal cannot detect a telephone line connection. Make
sure that the telephone cord is securely plugged into the
terminal.
NO MERCHANT ID
The terminal was incorrectly programmed without one of the
required ID’s for credit card, split dial or check processing
transactions.
NO PIN PAD
A PIN pad is not connected to the terminal or it is not activated.
An ATM/debit sale cannot be performed without a PIN pad.
NO PHONE NUMBER
The message displays when the primary host and/or the
secondary host phone number(s) were not downloaded into the
terminal.
NO TOTALS FOUND!
No transactions were found for the card type selected.
NOT FOUND!
The terminal displays this message when it cannot find the
information requested (i.e., there is no item number 99 in the
current batch).