Specifications

Table Of Contents
APPENDIX A—PROMPTS AND TROUBLE SHOOTING
1999 LinkPoint® International, Inc. 110 L3FRET1 Reference Manual
ENTER LAST 4 DIGITS
Card fraud protection prompt displayed after a card is swiped.
ENTER PASSWORD
This message prompts when a password is required to access a
function or transaction.
ENTER PHONE NUMBER
This message prompts during the download request.
ENTER TERMINAL ID
This message prompts during the download request.
ERROR!...NO MATCH
The four digits entered do not match the last four digits
encoded on the magnetic stripe of the card. Attempt to re-enter
the last four digits. If there is no match again, the terminal will
return to the READY message.
EXPIRED CARD
The expiration date sent with the authorization request
indicates that the card has expired. If the card is not expired,
the terminal may be programmed with the incorrect date.
EXPIRY DATE? (MMYY)
This message prompts after the keyed entry of the cardholder’s
account number.
IMPRINT REQUIRED IF
CARD IS PRESENT
This message prompts for approximately four seconds after the
card number and the expiration date are keyed.
INCORRECT AMOUNT
The terminal allows a maximum amount entry of nine positions
including the decimal point ($123456.78) or a minimum amount
entry of $.01. The amount entered does not fall within these
parameters.
INVALID AMOUNT
This message displays when a zero amount is entered for credit
card transactions or when an amount less than $1.00 is entered
for a check guarantee request.
INVALID CARD NUMBER
The cardholder’s account information transmitted to the host
computer is not valid (i.e., sending incorrect magnetic stripe
data).
INVALID EXP DATE
The expiration date entered was formatted incorrectly. The
correct date format is MMYY (i.e., for JANUARY 1999, 0199
should be entered).
INVALID PIN
The transaction was DECLINED because the customer entered
an incorrect PIN.
INVALID SERVICE
Optional service is not enabled.
INVALID TERM ID
The terminal has been programmed incorrectly.
INVALID TRAN TYPE
The terminal may not be programmed to accept this transaction
(i.e., terminal may not be setup to accept this card type).