Specifications

GETTING STARTED
LinkPoint International, Inc. ©1998 4 LinkPoint 2000
Installation
Installing the LinkPoint 2000 terminal is simple and requires no tools.
1. Connect the AC adapter to the power input at the rear of the LinkPoint
2000 terminal.
Figure 3
2. Plug the adapter into a 120V electrical outlet or into a surge suppresser.
Figure 4
3. Connect one end of the telephone line cord to one of the modular jacks
at the rear of the terminal. Connect the other end of the line cord to a
modular telephone wall jack, just as you would connect a telephone (see
Figure 5). Insert the modular plug directly into the wall jack, or use a 4-
prong adapter (not included) for older 4-prong jacks.
Note: You may connect a standard telephone or handset to the other
modular jack at the rear of the terminal.
Figure 5