User Manual

Overview

App Installation

Meshhub Home App is the mobile platform for controlling Linkoze devices. You can search "Meshhub Home" in the mobile application store to install the

App.

Activate the Device

Slide down the rear cover to open the device case. Then put two batteries into the product.

Thermometer

(Wi-Fi) EN

User Manual

PAGE 1
Thermometer (Wi-Fi) EN User Manual Overview App Installation Meshhub Home App is the mobile platform for controlling Linkoze devices. You can search "Meshhub Home" in the mobile application store to install the App. Activate the Device Slide down the rear cover to open the device case. Then put two batteries into the product.
PAGE 2
Device Pairing Long press the reset button for 10 seconds and release, the device is ready to be paired when the green LED flashes. Open the App and click the "+" button on the upper right corner, then click the thermometer button in the "Add a device" panel and follow the instructions in the app to pair the device. After the thermometer is paired, you can long press the device button on the main page of the App to inspect the thermometer status and view alarm history.
PAGE 3
Automation The automation function is available in the App to connect different devices. Each automation contains a series of trigger conditions and target actions. The target actions will be automatically triggered when the conditions are met. To set up an automation, click the “+” button in the upper right corner of the automation page. You can use the thermometer as a trigger condition and create target actions with other Linkoze appliances. Specifications Dimensions: 51 x 51 x 16.5 mm Weight: 18.