User's Manual

LED Table Lamp
User Manual
Thank you for purchasing BELL series LED Table Lamp.
Please read this user manual carefully and keep it for future reference.
If you need any assistance, please contact our service team with your
product model.
Package Includes
● LED Table Lamp
● AC Adapter
● User Manual
Product Diagram
Lamp
Cover
Aluminum
Base
Control
Panel
Type-C Power
Supply Port
Specification
Model
Wattage
KT-B01A
5W
Adapter Input
Current Ripple
Adapter Output
100-240V/AC 50/60Hz
Flicker Free ±3%
Network
WIFI IEEE802.11b/g/n(2.4GHz)
5V/1A
CCT / Color
Luminous Flux / Intensity
CRI
IP Protection
Operation Temperature
Dimensions
Lifetime
2000K-4000K / 16 Million Colors
450lm@4000K,
Red:7.2cd, Green:12cd, Blue:6.6cd
Ra:>80, Ra:>90@2000K/3000K
IP20
-20°C~40°C/-4°F~104°F
4.3'' X 4.3'' X 8.3''
(110mm X 110mm X 210mm)
30,000hrs
Type-C port on the lamp and insert the power adapter into a household
outlet. Short press the Power Button to turn on and off the lamp.
● Select Color Temperature and Adjust Brightness
Short press the Color Temperature Selection button repeatedly to cycle
through 2000K->3000K->4000K. Through the Rotary Switch to
precisely adjust brightness.
● Select Color-changing Mode and Color
Short press the RGB Selection button enter scene mode. Through the
Rotary Switch to select the fixed color.
● Set the Timer
Short press the Timer button, the lamp will turn off automatically after
30 minutes.
NOTE: Changing any setting (brightness, color temperature, color)
while the lamp is on will reset the timer.
● Indicator
The green light flashing indicates connecting status, the red light
flashing indicates the network disconnection.
Control Panel Operation
● ON/OFF
Place the lamp on a flat surface. Attach the power adapter to the
Installation Instruction
Smart lamps are designed to be easily used to control your home
improvements and appliances in smart way just follow steps below:
1. Search the latest version of “Tuya Smart” App from Apple App Store
or Google Play Store and also can scan the QR code.
2. Open the App and click register.
3. Select your country code, enter the cellphone number and get a
message containing a verification code.
4. Enter code in the “Verification Code” field, set your password and
tap “Login”.
NOTE: More information about App can be found on the website:
https://smartapp.tuya.com
Step two
1. Connect lamp to power supply and turn on the power.
2.Confirm whether the green indicator of the device is flashing,
if it is already flashing, it means that the device is in the connecting
status,if there is no flashing, please long press the timer button for
more than 5 seconds until the green indicator flashing and going into
connecting status.
Step three
1. Tap “+” or “Add device” button of the window. Select the lighting devices.
2. Make sure the lamp indicator quickly flashes and then tap “Confirm
light blinks rapidly”. If the indicator is not flashing quickly, tap the “AP
Mode” on the top right corner, and then tap “Confirm light slowly blink”.
3. Enter your home WIFI network password.
4. The progress bar shows your lamp is trying to connect, the “Add
successfully” message appears once connected.
5. If the device needs to be unbound after the configuration is completed,
please long press the timer button for more than 5 seconds until the
green indicator flashes, the device return to the initial connecting status ,
than you can reinstall it by following the installation instruction.
Cautions
1. Do not repair disassemble or modify under any circumstances.
2. Do not place near any heat source or in direct sunlight.
3. Unplug th adapter when the lamp is not used long time.
4. Power off before cleaning.
5. Never overload electrical circuits as it may cause electrical shock or fire.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement Caution: To maintain
compliance with the FCC’s RF exposure guidelines, place the product at
least 20cm from nearby persons.
Federal Communication Commission (FCC) Statement
for Users
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE: Ensure that the user can control the device normally, if you
have trouble or concerns with this step, please refer to the "help
center" in the column “me”.
Step one
Download “Tuya Smart” App and register an account.
1. Enter to the control interface after open the “Tuya Smart” App, then click on
the upper right corner of the lamp control interface to enter the lamp details.
2. Rename your lamp to be recognized by third-party smart control devices.
3. Choose the logo which you have installed in the supported Third-party
control bar and follow the instruction until install completed. The instruction
includes video, operation steps and example.
Third-party platform compatibility
How to use smart home AI devices control smart
lamps
Control Panel
Rotary Switch
Power
Button
Timer
Indicator
RGB Selection
Color Temperature
Selection