Data Sheet

LK8355
Shenzhen Linkiing Tech Co., Ltd 16 / 17 www.linkiing.com
(1) to the host product manufacturer, to define the application conditions (mobile, portable – xx cm from a
person’s body); and (2) additional text needed for the host product manufacturer to provide to end users in
their end-product manuals. If RF exposure statements and use conditions are not provided, then the host
product manufacturer is required to take responsibility of the module through a change in FCC ID/IC (new
application).
Explanation: This module complies with FCC/IC RF radiation exposure limits set forth for an uncontrolled
environment, This equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body." This module is designed to comply with the FCC/IC statement,
“Contains FCC ID: 2A8JX-LK8353, IC: 20034-LK8353”.
2.7 Antennas
A list of antennas included in the application for certification must be provided in the instructions. For modular
transmitters approved as limited modules, all applicable professional installer instructions must be included as
part of the information to the host product manufacturer. The antenna list shall also identify the antenna
types (monopole, PIFA, dipole, etc. (note that for example an “omni-directional antenna” is not considered to
be a specific “antenna type”)).
For situations where the host product manufacturer is responsible for an external connector, for example with
an RF pin and antenna trace design, the integration instructions shall inform the installer that unique antenna
connector must be used on the Part 15 authorized transmitters used in the host product. The module
manufacturers shall provide a list of acceptable unique connectors.
Explanation: The EUT has a PCB Antenna, and the antenna use a permanently attached antenna which is
unique.
2.8 Label and compliance information
Grantees are responsible for the continued compliance of their modules to the FCC/IC rules. This includes
advising host product manufacturers that they need to provide a physical or e-label stating “Contains FCC ID”
with their finished product. See Guidelines for Labeling and User Information for RF Devices – KDB
Publication 784748.
Explanation:The host system using this module, should have label in a visible area indicated the following
texts: "“Contains FCC ID: 2A8JX-LK8353, IC: 20034-LK8353”."