Specification Sheet

BLD114
Builder’s Series Square Smooth Coco Sink
DETAILS
Installation Type: Drop-In or Undermount
Stamped Metal
(Each sink is Hand Crafted; no two sinks will be the same.)
No Overlfow
AVAILABLE FINISHES
PB
Polished Unlacquered Brass
UB
Satin Unlacquered Brass
PS
Polished Stainless Steel
SS
Satin Stainless Steel
AVAILABLE DRAINS
D004
Grid Strainer
D005
Lift and Turn
D006
Pop-Up with Horizontal Lift Rod
D101 – D720
Decorative Drain
D011 – D017
Decorative Grid Strainer
INSTALLATION
A conversion kit for drain installation is provided with each sink
with 1.5” drain opening. Use 100% silicone to adhere sink to
countertop. Clean any excess silicone from sink surface. Clips
may be used for installation (not provided by Linkasink).
CARE
This sink has a living finish which will change with time and use.
Mild soap and water for everyday cleaning. No harsh or acidic
cleaning products or antibacterial hand soap. A paste wax may
be applied to protect the finish.
WARRANTY
Linkasink warranties our product to be free from manufacturing
defect for the life of the product. Warranty does not cover abuse.
DIMENSIONS WILL VARY
DO NOT use this sheet as a guide for countertop cuts. Due to the handmade nature of each product, templates are not provided.
Contact: 1.866.395.8377 [e-mail]
Linkasink may make changes to specifications without notice.
Visit linkasink.com for updated specification sheet.
9/1/2018
5”