Specification Sheet

BLD104-2
Small Round Bottom Builder’s Series – 2” Drain Opening
DETAILS
Installation Type: Drop-In or Undermount
Hammered Copper, Hammered Stainless Steel or Hammered
Unlacquered Brass
Uses 2" Drain
No Overflow
AVAILABLE FINISHES
AB
Antique Bronze
DB
Dark Bronze
SS
Satin Stainless Steel
PS
Polished Stainless Steel
UB
Unlacquered Brass - Satin
PB
Unlacquered Brass - Polished
AVAILABLE DRAINS
D001
2” Bar Drain
INSTALLATION
Drain should be installed first.
DROP-IN: Cut opening large enough for the sink to be “dropped
in” to countertop.
UNDERMOUNT: Cuts in countertop are up to the discretion of
the installer. Clips or other installation method must be provided
by the fabricator/installer.
Use 100% silicone to adhere sink to countertop. Clean any
excess silicone from sink surface.
CARE
Clean with mild soap. No abrasive chemicals
WARRANTY
Linkasink warranties our product to be free from manufacturing
defect for the life of the product. Warranty does not cover abuse.
DIMENSIONS WILL VARY
DO NOT use this sheet as a guide for countertop cuts. Due to the handmade nature of each product, templates are not provided.
Contact: 1.866.395.8377 [e-mail]
Linkasink may make changes to specifications without notice.
Visit
linkasink.com for updated specification sheet.
5/1/2019
2”