Installation Guide

• Solar Panel:5.5V 2W 350mAh
• LED: 36pcs SMD 0.06W/pc
• Rechargeable Li-ion Battery: 3.7v 2000mAh
EM-SL901B
OPERATION INSTRUCTION
1. Activate the device
Press the MODE button to activate the device and unlock the battery
and lighting system.
2. Installation
Please use the supplied expansion tube and screws to mount the
device bracket
3. Charging Via Solar Panel:
When installing the device, make sure the solar panel can directly
receive bright sunlight. The panel can be fully charged within
one day under bright sunlight.
4. Night sensor function
5. Bright light mode
TECHNICAL SPECIFICATIONS
• Color: Silver
• Dimension: 7.3in*4.3in*0.4in~1.2in
• Lumen Output: 100% Brightness ~180 (Max.)
20% Brightness ~ 40 (Max.)
• Solar Panel Life Span: ≥ 5 Year
ADDITION NOTE
Warning:
avoid explosion, leakage, moisture. No one except professional
technicians should attempt to disassemble the charger in order to
avoid damaging the charger.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT CONTAINS
IMPORTANT INFORMATION.
• Battery Life Span: 500 circles
• Lighting Time: 100% on for 30 seconds when there is
movement and remains 20% brightness full time
• Sensor Distance: Max. 9.8ft
• Charging Time: 6-8 hours of sunlight averagely
• Operating Time: 8-12 hours on a full battery
Made in China
Imported by Paragon Group USA
Englewood, NJ 07631 USA
1.888.783.6082
Size: 210mm×297mm
80g双胶纸单面黑白印刷
Motion Sensor LED Solar Light
onto the wall or anywhere outdoors you want
additional lighting. Slide the light body onto the mount bracket.
The light will automatically turn on in dim mode during the night or in
dark areas and will automatically turn off during the daytime or in
bright areas.
The light will automatically turn on when the motion detector
detects people within 9.8 ft.
Please fully charge the device before using.
It may take longer to fully charge this device during the winter season
when there is limited access to direct bright sunlight.