Full Product Manual
4 Adjusting the LUX control
NOTE: The “LUX” control determines how dark the surrounding light level needs to be
before the motion sensor (C) will turn on the light when motion is detected.
Turn the control knob LUX to adjust the daylight level: At the position , the motion
detector will only react at night. In the position , the motion detector will respond
at daylight levels.
5
Adjusting the motion sensor detection zone
Perform a “walk test”: walk in an arc across the front of the motion sensor (C). Watch
the light.
The light will come on indicating motion has been detected. Stop, wait for the light to
turn off, and then begin walking again. Continue this process until the detection zone
has been established.