User Manual

ERROR CODES
___________________________________________________________________
Error No. Message / Action
10-10
1) Check the MACH RATING setting in the Config menu
for correctness.
2) Adjust the indicated setpoint to a setting less
than 125% of the channel rating.
084 Data window 2, channel 1 low setpoint too high.
085 Data window 2, channel 2 low setpoint too high.
086 Data window 2, channel 3 low setpoint too high.
087 Data window 2, channel 4 low setpoint too high.
The Data window 2 low setpoint of the channel
indicated by the error code is set to a value
greater than 125% of the channel rating.
1) Check the MACH RATING setting in the Config menu
for correctness.
2) Adjust the indicated setpoint to a setting less
than 125% of the channel rating.
088 Data window 2, channel 1 reverse setpoint too high.
089 Data window 2, channel 2 reverse setpoint too high.
090 Data window 2, channel 3 reverse setpoint too high.
091 Data window 2, channel 4 reverse setpoint too high.
The Data window 2 reverse setpoint of the channel
indicated by the error code is set to a value
greater than 125% of the channel rating.
1) Check the MACH RATING setting in the Config menu
for correctness.
2) Adjust the indicated setpoint to a setting less
than 125% of the channel rating.
092 Data window 2, chan 1 high setpoint < low setpoint.
093 Data window 2, chan 2 high setpoint < low setpoint.
094 Data window 2, chan 3 high setpoint < low setpoint.
095 Data window 2, chan 4 high setpoint < low setpoint.