User Manual
Doc #: L-802-1110 Page 2 Rev. 02
3.2.5.6 Total Alarm/Stop Condition ......................................................................................... 24
3.2.5.7 Resetting Tonnage Alarms............................................................................................ 24
3.2.6 Error Conditions................................................................................................................ 24
3.2.6.1 Module Error Messages ................................................................................................ 24
3.2.6.2 Channel Errors .............................................................................................................. 26
3.2.6.3 Resetting Errors ............................................................................................................ 26
3.3 The Tonnage Monitor Diagnostic Screen................................................................................. 27
3.4 The Tonnage Monitor Bypass Setup Screen............................................................................. 29
3.5 The Tonnage Monitor Graph Screen ........................................................................................ 30
3.5.1 Graph Start Angle ............................................................................................................. 36
3.5.2 Graph End Angle .............................................................................................................. 36
3.5.3 Selecting the Channel to Graph ........................................................................................ 36
3.5.4 Graph Pan/Zoom Mode..................................................................................................... 36
3.5.5 Graphically Setting Values ............................................................................................... 37
3.5.6 Sending the Graph............................................................................................................. 37
3.5.7 Reference Waveforms....................................................................................................... 39
3.6 The Tonnage Monitor Graph Settings Screen .......................................................................... 40
4 CONFIGURATION.......................................................................................................................... 42
4.1 Turning the Tonnage Monitor ON in Device Config ............................................................... 42
4.2 Setting the Number of Channels ............................................................................................... 42
4.3 The Tonnage Monitor Configuration Screen............................................................................ 43
4.4 The Tonnage Monitor Machine Settings Screen ...................................................................... 44
4.4.1 Units.................................................................................................................................. 44
4.4.2 Machine Rating................................................................................................................. 45
4.4.3 Machine Rating Alarm Level............................................................................................ 45
4.4.4 Max Forward Setpoint Level ............................................................................................ 45
4.4.5 Max Reverse Setpoint Level............................................................................................. 45
4.4.6 Number of Data Windows ................................................................................................ 45
4.4.7 Filter Frequency................................................................................................................ 45
4.4.8 Sample Window Start Angle ............................................................................................ 45
4.4.9 Sample Window End Angle.............................................................................................. 46
4.4.10 Auto-Zero Start Angle ...................................................................................................... 46
4.4.11 Auto-Zero End Angle ....................................................................................................... 46
4.4.12 Peak High Limit Stop Type .............................................................................................. 46
4.4.13 DW High Limit Stop Type ............................................................................................... 46
4.4.14 Auto Unbypass Leaving Setup Mode ............................................................................... 46
4.4.15 Bypass Low Limits in Setup Mode................................................................................... 46
4.4.16 Resetting Alarm Counters................................................................................................. 47
4.5 The Tonnage Monitor Calibration Screen ................................................................................ 47
4.6 The Machine Rating De-rate Table Screen............................................................................... 48
5 JOB SETUPS.................................................................................................................................... 50
5.1 New Die Installation ................................................................................................................. 50
6 INSTALLATION ............................................................................................................................. 51
6.1 Mounting the Module ............................................................................................................... 51
6.2 Faceplate Connections and Indicators ...................................................................................... 52
6.3 Wiring Power for the Module................................................................................................... 52
6.4 Wiring High Speed Serial Bus Cable........................................................................................ 53