SDS

YiYang Corun Battery Co., Ltd.
Material Safety Data Sheet Model No.: Nickel-Metal Hydride Battery
Document Number: KLY-M-0101 Revision:2.0 Page 3 of 4
Section VIII – Fire and Explosion Hazard Data
Flash Point (Method Used)
N.A.
Ignition Temp
N.A.
Flammable Limits
N.A.
LEL
N.A.
UEL
N.A.
Extinguishing Media
Carbon Dioxide, Dry Chemical or Foam Extinguishers
Special Fire Fighting Procedures N.A.
Unusual Fire and Explosion Hazards
Do not dispose of battery in fire – may explode.
Do not short circuit battery – may cause burns.
Section IX – Accidental Release of Spillage
Steps to be Taken in case Material is Released or Spilled
Batteries that are leakage should be handled with rubber gloves.
Avoid direct contact with electrolyte.
Wear protective clothing and a positive pressure Self-Contained Breathing Apparatus (SCBA).
Section X – Handling and Storage
Safe handling and storage advice
Batteries should be handled and stored carefully to avoid short circuits.
Do not store in disorderly fashion, or allow metal objects to be mixed with stored batteries.
Never disassemble a battery.
Do not breathe call vapors or touch internal material with bare hands.
Keep batteries between -10℃and 40℃for prolong storage.
Section XI – Exposure Controls / Person Protection
Occupational Exposure Limits: LTEP
N.A.
STEP
N.A.
Respiratory Protection (Specify Type) : N.A.
Ventilation
Local Exhausts
N.A.
Special
N.A.
Mechanical (General)
N.A.
Other
N.A.
Protective Gloves
N.A.
Eye Protection
N.A.
Other Protective Clothing or Equipment N.A.
Work/Hygienic Practices N.A.
High Technology Industry Park, ChaoYang Development Zone, YiYang city, Hunan province, china
Telephone : [phone] Website: http://www.corun.com
Fax : [phone]
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.