Installation Guide

5
www.linkinteractive.com • 1-877-826-5443
DOOR SENSOR PLACEMENT
The doors on the ground oor of your home are the most common entry
points, so it makes sense to start there.
Check the packing slip
for the name you
selected at the time
of purchase that
corresponds with the
placement of each door
sensor. Then remove
the sensor from the
box and go to the
installation location.
STANDARD DOOR
PLACEMENT
Before you place your
sensor, take a look at
your door. If the door and
the frame are ush when
the door is closed, you
can place the magnet (smaller piece) on the door and the transmitter (larger
piece) on the frame, aligned as shown in the preferred install.
If you have crown molding or any other type of decorative molding, it might
be more convenient for you to reverse the setup, with the transmitter on the
door and the magnet on the frame, as shown in the optional install. If your
door is different, visit the Resource Center at www.linkinteractive.com/
installation-guide/ for setup instructions for alternative door types.
NEXT UP
Once you’ve gotten all of your ground floor
doors covered, let’s secure the windows.
Preferred Install
or Optional Install