Installation Guide

CONTROL PANEL

Superior Security and Automation start here. The touch-screen Control

Panel serves as the nerve center for your system. It’s a powerful device, but

setting it up is simple, so let’s get started.

Note: For GC3 control panel instructions, please go to

https://www.linkinteractive.com/installation-guide/

PLACE: Place your Touch-

Screen Control Panel on a

counter, tabletop or shelf

in a central location in your

home. Avoid placing within 4

feet of electronic devices or

large metallic objects such

as a refrigerator, TV or

washing machine.

SETUP : With a small Phil-

lips screwdriver, remove the

screw on top of the panel

(g 1). Insert a small,

straight screwdriver into the

slots and give a gentle quar-

ter turn, releasing the back

plate (g 2). Remove the AC

barrel plug from the panel,

feed it through the desk

mount and back plate and re-

connect it to the panel, then

reattach the back plate to the panel (g 3). Place the at antenna inside the

desk mount. Snap the desk mount to the back of the panel (g 4).

ARMING YOUR SYSTEM: Stay Mode - Activates all perimeter sensors and

allows you to move around your home without triggering the alarm.

Away Mode - Activates all sensors and protects your home while

you’re away.

NEXT UP

Tips for easy setup

ﬁg 1 ﬁg 2

ﬁg 3

ﬁg 4