Installation Guide

13
www.linkinteractive.com • 1-877-826-5443
CONGRATULATIONS!
YOU’VE COMPLETED THE SET-UP PROCESS.
ESSENTIAL STEPS TO COMPLETE AFTER INSTALLING YOUR SYSTEM
1. TEST YOUR SYSTEM
Press Security > Menu > Toolbox > Enter 4 digit master code > System Test.
Then trigger each sensor to provide feedback at the panel.
2. CONDUCT A CELL SIGNAL TEST
Press Security > Menu > Toolbox > Enter 4 digit master code > Cell Phone Test. Wait
for the results.
3. ACTIVATE YOUR SYSTEM
After installing your system, your 24/7 monitoring will not be activated until you call
1-877-826-5443 or email [e-mail].
Upon activation, you will also receive an emailed attachment which contains a
Certicate of Monitoring that you can provide to your insurance company in order to
receive any discounts offered.
Please note that if you do not install your system within 45 days from the ship date,
we will automatically activate your system for you.
4. REGISTER YOUR ALARM SYSTEM WITH LOCAL AGENCIES
You may be required to register your new alarm system with your local police
department, sheriff’s oce or emergency agencies depending on your installation
address. It is your responsibility to contact your local authorities to determine
registration, permit or licensing requirements. Failure to comply with the permitting
requirements of your local authorities may result in a ne. Any nes or fees
assessed to Link Interactive for failing to comply with the permitting requirements
will be charged in full to your account.
Please call 1-877-826-5443 with any questions: M-F 8 a.m. to 10 p.m. and Saturday
9 a.m. to 6 p.m. - Central Time.
5. REFERRALS
Much of our business is grown through customer referrals to friends and
family. If someone you know orders a system from us and lets us know you
referred them, we’ll say ‘thank you’ by crediting both accounts with one free
month of monitoring!
CONTACT LINK FOR ALL PRODUCT RETURNS/WARRANTY QUESTIONS.
1-877-826-5443