Installation Guide

www.linkinteractive.com • 1-877-826-5443

GLASS BREAK SENSOR

Use your Glass Break Sensor to secure any room with one or more windows.

PLACE: Place the Glass Break Sensor between 4 and 15 feet from the win-

dow or windows you wish to protect. You can mount it to a wall or ceiling or

set it on a shelf.

STEP 1

Hold detector upside down and twist base counterclockwise to remove from

back plate.

STEP 2

Place back plate on wall opposite or adjacent to window. Ax back plate to

desired location with supplied 3 long mounting screws and anchors.

Note: For wall mounting, orient the test button down nearest the floor. Also, keep in

mind that heavy draperies will hamper the effectiveness of your Glass Break Sensor.

STEP 3

Reattach detector to back plate (match alignment marks and twist clockwise).

NEXT UP

Now that you have your home protected, let’s move on to Life Safety

Sensors. We will start with our SMOKE/HEAT/FREEZE Sensor.