User Guide

AUX-IN
1. For other compable music devices or your MP3/MP4 players, use the
supplied audio line cable to connect from the device’s “Line Out” to the “Aux
In” of this devices. Then press the “M” buon to switch to AUX-IN state.
2. When using an external device, all funcons will be controlled by the external
devise except the “Play/Pause” buon.
TWs function
1. Turn on the two idencal speakers you want to be paired, please noted they
must be the same BT paring name, both under BT mode. Only need to set up
one of the two units;
2. 2.Long press “M” buon for around 4 seconds once ,one me “di” voice comes
out, then these two speakers go to connecng.
3. 3.Then connect the BT paring name of the two machines which already BU
paired, then music plays, one is in le channel while the rest one in right
channel.
Remarks
1. Press the “M” buon to switch the dierent modes, the order is Wireless, USB
, FM radio and AUX-IN.
2. Long press“Play/Pause” buon to cut o the power supply while without use.
Charging
1. Power o the unit, put the provided charging cable into the charging slot,
connect the other end to PC or other charger with 5V output (Not included).
The red charging indicator lights up.
2. Charging me should be 3-5 hours. When charging full, the indicator light will
switch o.
3. In order to prolong the life of baery, please do not charge more than 8 hours.
Accessories
Charging cable, Audio Cable, USER GUIDE