Operating Instructions

25. FILM HOLDERS

(classic and 2000)

CUTFILM HOLDERS

Cutfilm Holders are available either in 9 x 12 cm or 4 x 5 inch size. They are

inserted between the ground glass frame and the revolving frame of the cam-

era back until they positively engage in the groove on the small side of the back

frame. Detailed operating instructions are enclosed with every holder.

ROLLEX ROLLFILM BACKS

To attach the LINHOF SUPER ROLLEX and TECHNO-ROLLEX for 120 or 220

rollfilm, the groundglass frame must be removed by pressing down its two

spring-tensioned retaining arms (40) while sliding up the frame. The rollfilm

holders are locked to the frame by pushing the two locking slides (36) in direc-

tion of the arrow.

To rotate the revolving frame, for either horizontal or vertical frame, unlock lat-

eral knob (39).

The LINHOF RAPID ROLLEX slide-in rollfilm holder for format 6x7 cm is insert-

ed between the groundglass frame and the revolving frame of the camera back

like a cutfilm holder.