User guide

Page
Parts List
2012-2013 ZL1 Camaro Lingenfelter Air Intake Kit (PN: L650182012)
# Description Part number
1 air inlet duct, ZL1 Camaro, black XX05312-0003
1 airbox wall 10151022-1
1 air lter 10151022-2
1 MAF sensor housing 10151022-3
1 4” to 4.35” adapter hose, black 10151022-4
4 4”-4 1/2” hose clamp 10151022-5
5 10 - 32 Phillips head screws 10151022-6
1 edge seal, 11 7/8” long 10151022-7
1 edge seal, 24 1/2” long 10151022-8
1 M6 ange nut 10151022-9
1 ground bolt 11588712
1 4” hump hose with vent hose, black XX05312-0002
1 45 degree plastic nipple tting 25862741
1 Lingenfelter vinyl decal for airbox L920200000
1 Lingenfelter decal L920010000
1 instructions N/A
Tools & Materials Required
Optional Items
ratchet
7mm socket
8mm socket
Description Part number
Polished duct TBD - CALL
Lingenfelter ZL1 Camaro shock tower brace L500182012
Air lter cleaning and oil service kit SB-88-0005
ZL1 Camaro intercooler uid reservoir kit L300152012
10mm socket
10mm deep socket
Phillips head screwdriver
Read the entire instruction manual before beginning installation. Many of the stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the left
side and the passenger side of the vehicle is considered the right side of the vehicle.
Torque value warning - the torque values for the fasteners are provided in metric (Nm) and
then imperial units. For the imperial units some are referenced in lb-ft and others in lb-in. Make
sure you notice the difference and set your torque wrench correctly.
WARNING: Installation of this kit requires the power steering ground stud to be
removed and replaced with a ground bolt in order to create enough clearance for the
installation of the air lter. Make sure that the power steering ground wire is securely
fastened to the vehicle by the ground bolt. The power steering system, which is
grounded through this wire, is capable of pulling enough current to disable the entire
vehicle if the ground path gets interrupted.
2.