User Manual

Page
21. Re-install your modied bottom portion of
your air lter housing. Reinstall your stock air
lter or install the K&N replacement lter.
NOTE: LPE recommends the use of a K&N air
lter (part # 33-2411).
22. Install the top portion of your air lter
box. Make sure to plug in the MAF sensor after
bolting down the housing bolts.
23. Install the barbed end of the supplied 45
degree plastic tting [part # 25862741] into the
tting on the hump hose.
24. The front coupler will mount unto the
throttle body in the position shown.
8.