Owner manual
Read the entire instruction manual before beginning installation. Some stock
parts will be used in reassembly.
Page 2 of 7
• Workentireassemblyfreefrompushpins&removeas-
sembly from car.
• Removefourscrewsholdingtopmountradiatorshroud
&uncliphosefromtopmountradiatorshroud.
• Removetopmountradiatorshroud.
• Disconnectelectricalconnectorforunderhoodlight&
unclip electrical connector for under hood light from the
radiator shroud.
• Disconnecttheelectricalconnectorfromtheoutsideair
temperature sensor located low on the right side of the
shroud.
• Removethetwo“Christmastree”pushfastenershold-
ing the radiator shroud to the condenser (save the
fasteners for reuse). They are located approximately
midway up along each side.
• Disconnectbatteryground.
• Removegrayretainingcliponthebottomsideofthe
MAFsensor,thendisconnectMAFsensorconnector.
• Disconnectbreathertubefrombellows.
• Loosenhoseclampatthrottlebody,pullbellowsfrom
the throttle body.
• RemovethetwoT-30Torxstudsinthebumperbeam
(see picture). You will not be reusing these parts.
• Raisefrontofvehicle,followmanufacturerinstructions.
Usejackstandstosupportvehicle.