Manual

Step 10. Mounting the front of the air lter heat shield
- Secure the front of the air lter heat shield with the stock air box mounting bolt, as shown.
Step 11. Remove mass air ow (MAF) sensor from stock airbox
NOTE: Take care not to damage the sensor, touch any wires inside or damage the screen.
Step 12. Mass air ow duct assembly
- Install the silicone hose and steel tube on the screen end of the mass airow sensor.
- NOTE: Make sure that the steel tube is inserted into the silicone hose until it touches the MAF.
- NOTE: The hose clamps must be positioned with the screws between the ow arrow on the MAF and
the electrical connector as shown.
Page 7 of 11