Manual

Step 7. Installation of rubber seal
- Three strips of rubber seal are included with the kit. The longest of the three seals goes on the top of
the air lter heat shield and simply presses on, as shown in step 6. Push rmly to make sure the seal is
completely seated on the plastic.
Step 8. Install air lter heat shield
- Install the rear of the heat shield rst, then the front. NOTE: make sure you place the coolant hose in
the notched out area of the heat shield to avoid pinching the hose. (See picture below)
Step 9. Mounting the rear of the air lter heat shield
- Install the push rivet removed in step 5 to secure the rear of the air lter heat shield.
Page 6 of 11