User Manual

Page 4 of 9
Inthevoidwheretheairboxwas,youwillseea
fastenerwithaT-30Torxhead,removethisfastener.
Thestockairboxwillunfasteninamannersimilartothecoolantreservoir.Removetheairboxandthe
sectionofblackplasticthatmateduptotheairboxandtheheadlighthousing.Tiltthetopofthispiece
towardthebackofthecartoremovepiecemoreeasily.
Removetherubbergrommetthatisonthemounting
armlocatedonthebottomofthestockairbox.Install
thegrommetaspictured,usingthefactoryholeon
theupperportionoftheinnerfender.Nowinstallthe
fastener,torxheadrst,intothegrommet,thiswillserve
asamountingstudfortheairbox.