User Manual

Page 3 of 9
Loosenthemetalhoseclampthatattachestheairtubeto
thethrottlebodyandremovethestockairtubefromthe
throttlebody.Loosentheclampthatholdsthetubeto
theMassAirFlow(MAF)anddisconnectthestocktube
fromtheMAFsensor.DisconnecttheMAFharness
andtheairtemperaturesensorharness.Removethis
tubefromtheenginecompartmentcompletelyandplace
aside.LoosenhoseclampsattachedtoMAFsensor,
removefromenginecompartment.Placethesensor
aside,itwillbereinstalledlater.
CAUTION:BeverycarefulwhenhandlingtheMass
AirFlowsensor.Donotdent,punctureorotherwise
damagetheHoneycelllocatedattheairinletendof
theMAF.Donottouchthesensingelementsorallow
anything(includingcleaningsolventsandlubricants)
tocomeincontactwiththem.Donotdroporroughly
handletheMAF.Removetherubbergasket,thiswill
notbereinstalled.
Graspthecoolantreservoirtankwithtwohandsand
gentlyworkitbackandforthtofreeitfromitsplace
underthehood.Thispiecedoesnotneedtoberemoved
fromunderthehood;itonlyneedstobemovedfromthe
areaitwasoccupyingsothattheairboxcanbeinstalled.
Thereisasmallharnessconnectingtothebottomof
thetank,sodon’ttrytocompletelyremovethecoolant
assembly.