User Manual

ManualsBrandsLingenfelter ManualsCarL380180000 Lingenfelter Differential & Transmission Vent Bladder Kit v1.3

1

2

3

4

5

Page

3.

5. After test tting the rubber hose (PN:

5283K31) from the bladder to where it will

connect to the differential, cut the hose to

length.

6. Using the two (2) 13.3mm Oetiker clamps

(PN:52545K51) and the correct length of hose,

connect the hose to the hose joiner and the

differential.

3. Select a location for the bladder on the

vehicle that will allow the uid to be gravity-fed

back into the differential or transmission. Mount

the bladder (PN: XX04556-0010) to the vehicle

where desired.

4. Press the 1/4” to 1/2” hose joiner (PN:

WWG4HFL2) into the bladder tube selected

in the previous step. Secure the hose joiner

to the bladder using a 17.0mm Oetiker clamp

(PN:52545K55). Tighten the clamp with a pair

of Oeticker clamp pliers (or equivalent).