Instruction Manual

Page 1.

Parts List

Clutch Return Spring and Bracket kit

# Description Part number

1 Camaro/CTS-V clutch return spring bracket, stainless XX03953-0002

1 Return spring, stainless w. sleeve PAC-SSD-036

1 Set screw, 1/4-20x5/8 90289A539

1 1/4-20 spin lock nut 34292

1 LPE 9” decal L920010000

1 Instructions N/A

Tools & Materials Required

Optional Items

• Pry tool (or athead screwdriver)

• Drill (CTS-V only)

• 1/8” drill bit (CTS-V only)

• Flashlight or worklight

# Part number Description

1 L360020105 LPE 6 bolt LS9 twin disk clutch kit

1 L360100105 LPE 6 bolt high clamp load LS9 twin disk clutch kit

1 L360031410 Camaro SS clutch spacer

1 L820021410 LPE 2010-2013 Camaro SS MT pedal cover set

1 L820011410 LPE 2012-2013 Camaro SS MT wide pedal cover set

1 L820120709 LPE 2009-2013 CTS-V MT pedal cover set

1 L820090704 LPE 2009-2013 CTS-V MT wide pedal cover kit

Read the entire instruction manual before beginning installation. Some stock parts will

be used in reassembly.

When referencing the side of the vehicle, the driver side of the vehicle is considered the

left side and the passenger side of the vehicle is considered the right side of the vehicle.

Multiple vehicles may be used for these installation instructions; however, the process

remains the same for these applications.

The LPE clutch pedal return spring kit is designed to solve the problem of the clutch

pedal not returning under some high RPM shift conditions. The kit may also speed up the

application of the clutch after the pedal is released, reducing potential clutch slip and

heat generation on the shifts. A similar kit is also available for the C5 & C6 Corvette.

For the 5th gen Camaro (2010-2013) installation instructions, see step 1 on page 2.

For the Cadillac CTS-V (2009-2013) installation instructions, see step 8 on page 4.

• 1/8” hex key

• 7/16” wrench or socket

• Ratchet

• Torque wrench