Owner's manual
Page
5. Slide the bracket down to the machining
tab on the clutch pedal as indicated by the red
arrow. Insert the set screw and, using a 1/8” hex
key, tighten it down to secure the clutch return
spring bracket to the clutch pedal.
6. Install the locking nut on the end of the set
screw. Using a 7/16” socket and torque wrench,
torque the locking nut to 89 in-lb.
7. The installation of the clutch return spring
kit is now complete on your C6 Corvette. After
driving the vehicle for a while we recommend
checking the fasteners to make sure the bracket
is still secured to the pedal assembly.
4.