User Manual

Page 6.
16. Reinstall the front oor console front cover
by placing the end with the gauges in rst.
As you lower the other end of the front cover
into place, gently press down on the front
cover to re-engage the retainer tabs.
Installation of the LPE shift knob kit and
the LPE shift knob boot adapter kit is now
complete.
For additional product installation information and technical support, contact LPE or your LPE
products distributor. You can also nd technical support and usage discussions regarding
this product and many other LPE products in our Internet forums:
http://www.lingenfelter.com/LPEforumles
Lingenfelter Performance Engineering
1557 Winchester Road
Decatur, IN 46733
[phone]
[phone] fax
www.lingenfelter.com
L350191410 LPE shift knob boot adapter v1.1.indd