Upgrade Kit v1.0 User guide

Page
3.
1. If you have been driving the vehicle, make
sure to allow a couple hours for the engine to
cool down before beginning installation.
2. Raise the vehicle with a vehicle hoist or a jack
and jackstands. Be careful to follow the GM
lifting procedures for the CTS-V.
3. Locate the intercooler pump. This pump
should be located just inside of the passenger
side engine brace, just behind the radiator.
4. Using a pair of hose clamp pliers, loosen the
hose clamp on the inlet hose. Disconnect
the inlet hose from the intercooler pump and
let both the pump and the hose drain into a
bucket.