Instruction Manual

Page
13. For ZL1 convertibles, the front support brace
has to be removed, using a 13mm socket,
remove the four bolts holding it on.
Note: This part will not be able to be reused
with the Lingenfelter Intercooler.
14. Using a at head screw driver, remove the
eight plastic retainer clips marked in the
picture and remove the plastic shrouds they
are holding in.
15. Un-clip the air temperature sensor from the
back of the passenger side plastic piece and
nish removing the plastic piece.
16. Remove the four bolts using a 10 mm
socket, and remove the front facia support.
6.