Instruction Manual

Page
4.
6. Remove all six of the plastic retainer clips
from the top of the front facia marked by
yellow arrows using a at head screwdriver.
Using a 10 mm socket, loosen the two
corner screws marked by the blue arrows.
7. Remove the bottom two screws of the front
facia using a 10 mm socket.
5. For ZL1 Camaro, please skip to step 6.
On the Camaro SS remove the ve screws
using a 10 mm socket and the ve fasteners
using a at head screw driver on the inner
wheel well liner, then remove the wheel well
liner.
8. If the Camaro is equipped with fog lights,
then disconnect the two connectors for the
fog lights, one on each side.