Instruction Manual

Page
21.
connect the fog lights harness to the facia.
75. Push in the six plastic retaining clips on top
of the car and tighten down the two corner
screws to 62 lb-in (7 Nm).
76. For the SS Camaro, please skip to step 79.
For the ZL1 Camaro insert the fender liner.
Start the seven screws in the wheel well to
hold it in place.
77. Install the ve screws or bolts in the bottom
facia, one of each on each side accessed
from inside the wheel well, and tighten the
bolt to 27 lb-in (3 Nm) and the screw to 62
lb-in (7 Nm).
74. If the vehicle is equipped with fog lights,