Instruction Manual

Page
four 10 mm head bolts to 89 lb-in (10 Nm).
70. Carefully place the front facia back onto the
20.
car, loosely install the corner screws on top
of the facia.
71. Install the six bolts, three each side, on the
sides of the facia, accessed from inside the
wheel well and tighten to 62 lb-in (7 Nm).
72. Install the two 10 mm head bolts on the
bottom of the facia and tighten to 62 lb-in
(7 Nm).
73. Install the two bolts and two screws on the