Instruction Manual

Page
45. Insert the three ground wires there, reinstall
the bolt and tighten to 18 lb-ft (25 Nm).
46. Set the operating temperatures on the
TBRC-001. Recommended temperatures
are 90 degrees for fans on low and 110 for
fans on high with a 10 degree hysteresis
as shown in the picture to the left. Do this
by turning the knobs for Temp 1 to 0 on the
x100 and 9 on the x10; 1 on the x100 and 1
on the x10 for Temp 2 dials; and 1 on the 16
option dial.
47. Hold the TBRC-001 up to where you would
like it mounted. A recommended location is
the metal ange just to the passenger side
of the fuse box.
48. Clean the surface well with brake clean or
equivalent and a paper towel or air hose.
14.