Owner's manual

Page
7
13. Using a 10 mm socket and extension,
remove the four bumper fascia bolts (2
per side) that secure the front fascia to the
bumper beam. Access these bolts from
each front wheel well.
14. Disconnect the electrical connector from
each fog light.
15. The washer uid pump is located on the
passenger side of the vehicle behind the fog
light area. Remove the line from the washer
uid pump that is used for the headlight
washers. A rubber vacuum cap may be used
to prevent washer uid from leaking out until
reassembly.
16. With the help of an assistant, carefully
remove the front bumper and set it
somewhere safe so it won’t be damaged.