Owner's manual

Page 6
12. Remove the eight push pins holding in the
front part of the fender liner and remove the
fender liner. Repeat this process for both the
passenger and driver side front inner fender
liners.
11. In each wheel well, an engine splash
shield exists. This felt-like material shield
is secured to the wheel well liner with four
push pins. Remove the four (4) push pins
and remove the splash shield. Repeat this
process for both the passenger and driver
side splash shields.
10. Using a fork tool, remove the Christmas tree
fasteners that secure each rubber shroud to
the front fascia on both sides of the radiator
(two per side, four total).
9. Locate the exible rubber shrouds that are
on either side of the radiator.